| Input |
• Rated input voltage |
100 ÷ 240Vac |
|
• Line frequency |
47÷63 Hz |
|
• Input current (max) |
7A - 2.8A (100 - 240Vac) |
|
• Power factor |
0,9 typ |
|
• Leakage current to GND (max) |
< 0,3 mA |
|
• Input protection |
• Inrush current limitation (cold start) < 40A (on 85Vac) and <20A (on 265Vac) • Fuses on input line • RFI filter |
|
• Input inhibit |
• TTL/CMOS comp. High active |
|
• Input connections |
• Input connector: PHOENIX GMSTBA 2,5/ 3-G7,62 |
|
• Output voltage temp drift |
0,02% /°C |
| Output |
• Output power (max) |
600W nom. |
|
• Hold up time |
20ms |
|
• Output protections |
• Over current protection • Over voltage protection |
|
• Output connections |
• Output Connector : TYCO 1-350944-0 |
| General Features |
• Dieletric withstand voltage |
• Comply with EN60601-1 |
|
• Isolation |
• Comply with EN60601-1 |
|
• See table for |
• Output voltages and currents • Tollerance (line+load.) • Output Ripple & Noise |
|
• Cooling |
Forced by fan |
|
• Other features |
Voltage programming: with Vprog.=0V correspond Vout=400V with Vprog.=10V correspond Vout=500V Manufacture comply with: • IPC610 Level 1 • RoHs |
|
• Operating temperature |
-10° ÷ +50° C |
|
• Storage temperature |
-25° ÷ +70°C |
|
• Humidity |
95% (with dew) |
|
• Comply with |
• IEC EN 60601-1+A1+A2 • EN 55011 Classe B • EN 60825 • EN 61000-3-2 • EN 61000-3-3 (Flickers) PLT<0,65 Vnom. X 9 cycles • EN 61000-4-3 (RF Immunity) • EN 61000-4-6 (RF Immunity) • EN 61000-4-4 (Surge) • EN 61000-4-5 (Burst) • EN 61000-4-11 • EN 61000-4-2 |
|
• Application field |
Medical application |